fbpx
  • contact@scarhandpainting.com

Tag Archive Star Wars Shatterpoint

Tutorial: Painting Star Wars Shatterpoint Aurra Sing

Welcome to Painting Star Wars: Shatterpoint Cad Bane tutorial. Here I will present to you a Step-by-step of a basic painting process for Fistful of Credits Aurra Sing miniature and a few extras.

Before we start, some notes:

  • This tutorial is sponsored by Rebel.pl, polish distributor of Star Wars: Shatterpoint and The Army Painter.
  • The entire painting process presented in this tutorial was accomplished using The Army Painter accessories provided by Rebel.pl
  • The tutorial is focused on basic techniques. Perfect for beginner hobbyists, eager to field their miniatures as soon as possible. The second part is a bit more advanced for those of you willing to put in some extra effort.
  • Please note pictures present a huge miniature under strong light that might result in a feel of messy, clumsy paint job.
  • As usual, please take note that what works for me might not necessarily work for you.

Miniature Preparation & Notes.

Both Mandalorian Super Commandos were prepared in the same way as previous Shatterpoint miniatures. Visit Tutorial: Painting Star Wars Shatterpoint Clone Troopers article for a detailed step-by-step guide.



Undercoating:

I mounted the miniatures on a stick with a piece of Blu-Tack, then undercoated them with The Army Painter White Matt Primer.



BASIC PART:


Clothes:

Aurra Sing is commonly represented in either opaque orange or yellow clothes. I decided to base this paint job on Fistful of Credits box art, so honey yellow. Using Wargamer: Character Brush I have painted all clothes with Ancient Honey Speedpaint.



Brown Accessories:

Next, using the same brush, I’ve painted boots, weapon holsters, straps, hair and vest with Brownish Decay.



Corrections:

I’ve made quite a few mistakes with previous layers that I have corrected in this step using Matt White.



Skin:

To better represent Aurra’s pale grey’ish skin tone I applied a layer of Ashen Grey.



Weapons:

I then painted weapons, strap buckles and hair jewelry with Grim Black Speedpaint.



Eyes:

Painting eyes is a craft in its own category. Fortunately for Aurra here two small dots of Matt Black followed by delicate ‘touches’ of Dark Tone wash worked like a charm. I also applied Dark Tone wash to her lips. Wargamer Detail Brush was perfect for this step.



Base:

Finally I have painted the base following steps previously presented in the Tutorial: Painting Star Wars Shatterpoint Clone Troopers article, at which point the basic painting process was over and the miniature might have been considered done… but why not take it further?



ADVANCED PART:


Advanced Clothes:

To bring more depth to Aurra’s clothes I applied a layer of Flesh Wash.



Weapons Highlights:

With Wargamer: Detail Brush I applied thin lines of Mummy Robes to the sharp edges of weapons and strap buckles. I also applied a few tiny dots to selected spots on weapons, buckles and hair jewelry. Dots of bright colors create focus points that result in more contrast within a particular color range.



Advanced Weapon Strap:

Next I applied similar lines and dots to the weapon strap with Elven Flesh color.



Brown Highlights:

All other browns, including straps, hair, boots and weapon holsters, I have highlighted with lines and dots of Mummy Robes to prepare them for upcoming color filters.



Brown Filters:

Next I have applied slightly thinned down Dusk Red to all elements, except for hair that got Brownish Decay treatment instead. Combined with well punctuated weapon strap the miniature ended up with a nicely diversified range of browns.



Finally I Varnished the miniature the same way as presented in the Tutorial: Painting Star Wars Shatterpoint Clone Troopers article.





I hope you find this tutorial interesting. Be sure to let me know your thoughts in the comments below or via Facebook or Instagram. I would also appreciate it if you considered sharing this content with your friends, who might find it useful. Many thanks to Rebel.pl for sponsoring this content. Stay tuned for more Star Wars: Shatterpoint tutorials.

Tutorial: Painting Starw Wars Shatterpoint Cad Bane

Welcome to Painting Star Wars: Shatterpoint Cad Bane tutorial. Here I will present to you a Step-by-step of a basic painting process for Fistful of Credits Cad Bane miniature and a few extras.

Before we start, some notes:

  • This tutorial is sponsored by Rebel.pl, polish distributor of Star Wars: Shatterpoint and The Army Painter.
  • The entire painting process presented in this tutorial was accomplished using The Army Painter accessories provided by Rebel.pl
  • The tutorial is focused on basic techniques. Perfect for beginner hobbyists, eager to field their miniatures as soon as possible. The second part is a bit more advanced for those of you willing to put in some extra effort.
  • Please note pictures present a huge miniature under strong light that might result in a feel of messy, clumsy paint job.
  • As usual, please take note that what works for me might not necessarily work for you.

Miniature Preparation & Notes.

Both Mandalorian Super Commandos were prepared in the same way as previous Shatterpoint miniatures. Visit Tutorial: Painting Star Wars Shatterpoint Clone Troopers article for a detailed step-by-step guide.



Undercoating:

I mounted the miniatures on a stick with a piece of Blu-Tack, then undercoated them with The Army Painter White Matt Primer.



BASIC PART:


Brown Clothes:

Mostly clothed in brown, the Cad Bane clearly favors comfort over style, or at least this is what I tell myself. The color is so prominent that I have decided to start with it and build from there. Using a Wargamer: Regiment Brush I have covered the entire miniature with Brownish Decay Speedpaint.

Then, once the first layer dried out completely, I repeated the process by applying another layer of Brownish Decay.



Skin:

Usually I would have left some areas unpainted, but in this case painting around just a few spots (mainly face and fingers) was too much of a hassle, not worth the time investment. Instead I have repainted these areas with Matt White, thus creating a nice base for the upcoming Speedpaint coloration.



Next, with a Wargamer: Detail Brush, I applied Royal Blue Speedpaint to the face and the exposed fingers of the miniature. 



Dark Details:

Weapons, breathing pipes, armor, had detail and the ‘under’ pants I have painted black with Grim Black Speedpaint, darkening them and creating a solid base for future highlights.



I then followed up with semi-highlights of flatbrushed Matt White. I tried to leave the excess of the paint on a dry palette and move the tip of the brush back and forth leaving blurred lines of paint on chosen surfaces. I deliberately skipped the pistols. 



Eyes:

For eyes I used a Wargamer: Detail Brush, applying lines of Matt White, followed up by a touch of Poppy Red Speedpaint.



Finally I have painted the base following steps previously presented in the Tutorial: Painting Star Wars Shatterpoint Clone Troopers article, at which point the basic painting process was over and the miniature might have been considered done… but why not take it further?


ADVANCED PART:


Dark Details Highlights:

With Wargamer: Character Brush I applied thin lines and dots of Mummy Robes paint on the edges and in selected spots of weapons, breathing pipes, pants, armor and dark had elements. Dots of bright colors create focus points that result in more contrast within a particular color range.



Brown Highlights:

I then did the same for Browns, switching Mummy Robes for Elven Flesh which has a warmer feel to it, thus is more compatible with brow. For large, flat areas I applied small smudges and scratches of Elven Flesh with a tip of the brush, creating an interesting texture.



Brown Filter:

Next I applied a ‘filter’ of Flesh Wash all over browns, that toned down (and ‘browned down’) the excessive highlights.



Brown Diversity:

Following the box art I’ve decided to diversify browns a bit, by first applying lines and scratches of Mummy Robes on the edges alongside the satchel, gun holsters and the top of the boots. I used the opportunity to apply a few small dots of Mummy Robes to the face of the miniature as well, adding a nice highlight.



I then applied a ‘filter’ of slightly thinned down Rusk Red Speedpaint to the satchel, boots and holsters, adding a nice red’ish feel to them.



Finally I Varnished the miniature the same way as presented in the Tutorial: Painting Star Wars Shatterpoint Clone Troopers article.




I hope you find this tutorial interesting. Be sure to let me know your thoughts in the comments below or via Facebook or Instagram. I would also appreciate it if you considered sharing this content with your friends, who might find it useful. Many thanks to Rebel.pl for sponsoring this content. Stay tuned for more Star Wars: Shatterpoint tutorials.

Tutorial: Painting Star Wars Shatterpoint Super Commandos

Welcome to Painting Star Wars: Shatterpoint Super Commandos tutorial. Here I will present to you a Step-by-step of a basic painting process for Mandalorian Super Commandos and a few extras.

Before we start, some notes:

  • This tutorial is sponsored by Rebel.pl, polish distributor of Star Wars: Shatterpoint and The Army Painter.
  • The entire painting process presented in this tutorial was accomplished using The Army Painter accessories provided by Rebel.pl
  • The tutorial is focused on basic techniques. Perfect for beginner hobbyists, eager to field their miniatures as soon as possible.
  • Please note pictures present a huge miniature under strong light that might result in a feel of messy, clumsy paint job.
  • As usual, please take note that what works for me might not necessarily work for you.

Miniature Preparation & Notes.

Both Mandalorian Super Commandos were prepared in the same way as previous Shatterpoint miniatures. Visit Tutorial: Painting Star Wars Shatterpoint Clone Troopers article for a detailed step-by-step guide.


Undercoating:

I mounted the miniatures on a stick with a piece of Blu-Tack, then undercoated them with The Army Painter White Matt Primer.



Dark Clothes and Armor:

I started by applying Grim Black Speed Paint to most of the miniature, leaving out only a few selected armor elements and backpack exhaust fumes. My brushes of choice were Wargamer: Regiment Brush and Wargamer: Character Brush.

TIP: I then used a tip of a toothpick to softly scratch any mistakes of black paint getting where it wasn’t supposed to.



Red Armor:

Next, using the same two brushes, I applied Slaughter Red Speed Paint onto white armor plates.
I then repeated the process, adding another layer of Slaughter Red to add warmth and deepen the red color.



Belts and Weapons:

For Belts and Weapons I applied a layer of Ash Grey. I used the Wargamer: Character Brush and the Flatbrush technique to do this.

TIP: Flatbrushing is done by putting the tip of a brush in paint, then brushing the excess paint off onto a piece of paper or other smooth surface material, then brushing the remainder of the paint onto the chosen surface, in one direction and perpendicular to any edges. This technique works best with brushes equipped with a long “head” or synthetic brushes with a long “belly” part. You can learn more about the technique HERE.



Exhaust Fumes:

Focusing on easy methodology I built a volume of smoke like color by thinning Ashen Stone Speed Paint with water, and covering the entire surface with the resulting mix.



I then applied another mix. This time I used water to thin down Ash Grey in a 1:1 ratio.
Next I manually applied some Matt White (Air) to the upper, most exposed parts. Air paints are thin by nature, which resulted in a nice color gradation between upper and lower areas of fumes.



Finally I painted the top of the exhaust fumes with Maize Yellow Speed Paint, followed short by Nuclear Sunset Speed Paint at the very top.
To make the colors pop I drew a few lines of Matt White along the most exposed areas.



[Optional] Black and Grey Highlights:

To make dark clothes, armor, belt and weapons pop I applied a simple, selective highlight of Mummy Robes. I focused on the most exposed, easy to access edges, painting thin lines with a side of Wargamer: Detail Brush.



[Optional] Red Highlights:

I have switched paint to Barbarian Flesh and repeated the process for Red armor.



Rank Pin:

To add a final touch I have painted the chest armor pin Matt White, followed short with Maize Yellow Speed Paint.



Finally I have painted bases and Varnished both miniatures following steps previously presented in the Tutorial: Painting Star Wars Shatterpoint Clone Troopers article.




I hope you find this tutorial interesting. Be sure to let me know your thoughts in the comments below or via Facebook or Instagram. I would also appreciate it if you considered sharing this content with your friends, who might find it useful. Many thanks to Rebel.pl for sponsoring this content. Stay tuned for more Star Wars: Shatterpoint tutorials.

Tutorial: Painting Star Wars Shatterpoint Battle Droids

Welcome to Painting Star Wars: Shatterpoint Battle Droids tutorial. Here I will present to you a Step-by-step of a basic painting process for Battle Droids.

Before we start, some notes:

  • This tutorial is sponsored by Rebel.pl, polish distributor of Star Wars: Shatterpoint and The Army Painter.
  • The entire preparation and painting process presented in this tutorial was accomplished using The Army Painter accessories provided by Rebel.pl
  • The tutorial is focused on basic techniques. Perfect for beginner hobbyists, eager to field their miniatures as soon as possible.
  • Please note pictures present a huge miniature under strong light that might result in a feel of messy, clumsy paint job.
  • As usual, please take note that what works for me might not necessarily work for you.

Miniatures Preparation & Notes.

In case you are totally unfamiliar with the hobby, I have prepared a short guide on Shatterpoint miniatures preparation and assembly, including some in-depth notes regarding priming and particular painting techniques. You can find it in the previous article: Tutorial: Painting Star Wars Shatterpoint Clone Troopers.

TIP: To better present the painting process I have kept one Droid on a separate base. If you feel it might be difficult to paint multiple miniatures glued to a single base, you can paint them separately, then glue together just before the Varnish step.



Undercoating:

I mounted the miniatures on a stick with a piece of Blu-Tack, then undercoated them with The Army Painter White Matt Primer.



Droid Armor:

With Wargamer: Monster Brush I have applied a thick layer of Ancient Honey Speed Paint over the miniatures, except for weapons. This created a strong, bright base color.

TIP: No need to worry about the weapons too much. The painting process was designed to cover any mistakes made at this point.



Next, with a softer Wargamer: Regiment Brush, I applied a solid layer of Soft Tone all over the armor. Washes, such as Soft Tone, provide strong pigmentation in all recesses, adding color depth. They also tone down the entire color a bit, which in case of Battle Droids, works to our advantage.



Weapons:

For weapons I went with the Grim Black. This Speed Paint was already tested during the Clone Troopers tutorial, so I knew it would cover any previous mistakes left on the painted areas. I used a Wargamer: Regiment Brush and did my best to avoid messing up the bright Droid armor.

TIP: This might be a difficult step for anyone not familiar with a brush. I recommend switching between different brush sizes and moving the miniature around for easier access. Speed Paints are thin, so you do not have to ‘lead’ the tip of the brush too much. Delicate touches will do.



Highlights:

To apply an overall highlight I Drybrushed Skeleton Bone all over the miniature. I used Masterclass Mighty and Moderate Drybrush for this, but it can be done with Wargamer: Large Drybrush as well.



Red Detail:

I used Poppy Red Speed Paint and applied it on top of chosen areas with Wargamer: Insane Detail Brush. As a Speed Paint the Poppy Red is perfect to cover bright paints underneath, including edges, previously highlighted with Skeleton Bone.



Next I applied a layer of Red Tone wash on top, to add depth and darken the color just a bit.



[Optional] Weapon highlights:

To make weapons pop, I used a Wargamer: Regiment Brush and applied a Dark Tone wash over them.



I then highlighted the edges with Mummy Robes, similar to how I did it in the Clone Troopers tutorial.



Bases:

For bases I applied a layer of Raven Black (air) with a Wargamer: Regiment Brush. Just like with Clone Troopers, I deliberately used air series paint for an extra messy end result.



I then applied a strong drybrush of Ash Grey all over the bases and feet of the miniatures.



Base Edges:

Finally I finished the bases with smooth, black edges. One layer of Matt Black, applied with Wargamer: Regiment Brush.



Lastly I sealed the paint job with Anti Shine Matt Varnish.




I hope you find this tutorial interesting. Be sure to let me know your thoughts in the comments below or via Facebook or Instagram. I would also appreciate it if you considered sharing this content with your friends, who might find it useful. Many thanks to Rebel.pl for sponsoring this content. Stay tuned for more Star Wars: Shatterpoint tutorials.

Tutorial: Painting Star Wars Shatterpoint Clone Troopers

Welcome to Painting Star Wars: Shatterpoint Clone Troopers tutorial. Here I will present to you a Step-by-step of a basic painting process for Clone Troopers, with few optional extras.

Before we start, some notes:

  • This tutorial is sponsored by Rebel.pl, polish distributor of Star Wars: Shatterpoint and The Army Painter.
  • The entire preparation and painting process presented in this tutorial was accomplished using The Army Painter accessories provided by Rebel.pl
  • The tutorial is focused on basic techniques and few extras. Perfect for beginner hobbyists, eager to field their miniatures as soon as possible.
  • Please note pictures present a huge miniature under strong light that might result in a feel of messy, clumsy paint job.
  • As usual, please take note that what works for me might not necessarily work for you.

Miniatures Preparation:

In case you are totally unfamiliar with the hobby, Star Wars: Shatterpoint being your very first step into the overall Wargaming, below are a few basic steps of miniatures build and preparation.

  • Using a Plastic Frame Cutter I removed all elements of a chosen miniature from the sprues.
  • I then used a Hobby Knife to gently scrape off any flash (mold lines residue). I kept the blade away from my hand and at an angle, sliding it towards my palm. This not only protected me from any injuries, but also left the surface smooth, rather than ragged.
  • Next I applied a bit of Super Glue and gently pushed the parts together until the entire miniature was built. (You can take time between parts to let the glue harden, or use Super Glue Activator to make the binding process instantaneous.)


Undercoating:

Undercoating miniatures is a topic on its own. Each primer color and technique of application has some advantages. For this tutorial I chose The Army Painter White Matt Primer and sprayed the miniatures around, mounted on a stick with a piece of Blu-Tack. This resulted in a durable, smooth surface, perfect for this kind of paint job. It also allowed me to skip an otherwise difficult first step – white armor.



Weapons & Under Armor:

With a Wargamer: Character brush I applied Grim Black Speed Paint over weapons and cloth. I then switched to Wargamer: The Psycho to apply more paint into recesses between armor and onto helmet visors.

TIP: This step is a bit tricky. A lot can go wrong. Fortunately, thanks to spray undercoat’s durability and smoothness, any bloopers can be erased using a toothbrush soaked in water. Simply soak the tip of a toothpick in water, then flatten it with a pair of pliers to make an ultimate bloopers eraser.



Blue Markings:

Next I applied Magic Blue Speed Paint onto shoulder guards and in selected areas on helmets and chest plates. I used Wargamer: Insane Detail and Wargamer: The Psycho brushes for this. Usually, when using thin paints such as Speed Paints I go with larger brushes, but here I aimed at precise application.

I then used a tip of a toothpick to scratch blue surface, adding some character with thematic battle damage. This wouldn’t be possible on most undercoats, but The Army Painter primers leave a really strong plastic-like surface.



[Optional] Weapon Highlights:

Using a Wargamer: Regiment Brush I then applied a highlight of Mummy Robes onto the top edges of the guns. Due to wider, more sturdy heads, I find larger brushes better for this kind of job. The key was to keep the paint to a minimum and slide the brush perpendicularly across the top surface of each gun.



[Optional] Weathering:

I then used a pair of tweezers and a piece of foam to stipple Oak Brown all over the armor plates. This broke the otherwise flat looking armor and provided additional detail to the miniatures.



Bases – Plates:

For bases I decided to keep them relatively simple, to make the miniatures stand out. First I applied a layer of Raven Black (air), starting carefully around the miniature’s feet, then expanding outwards. I deliberately used air series paint for an extra messy end result – free details on the painted surface. I used Wargamer: Regiment Brush for this and the next layer.



Next, using the same methodology, I followed up with Crow Hue.



I then drybrushed entire base with Ash Grey.

TIP: Drybrush is done by putting the tip of a brush in paint, then brushing the excess paint off onto a piece of paper, foam or some other material, then brushing the remainder of the paint onto the chosen surface. This can be done with either standard Small/Large Drybrush, or Masterclass for easier, faster application.



Bases – Sand:

For sand I applied Yellow Dune (air), followed by a wash with Flesh Wash paint.

TIP: Washing is done by applying Washes, or Inks in large quantities and letting them dry. The pigmentation goes into recesses, highlighting any raised areas.



Next I drybrushed sand and surrounding areas with Mummy Robes.


[Optional] Extra Base Detail:

To add depth I highlighted concrete plates edges with Mummy Robes…



… then thinned Mummy Robes with a bit of water and wiped the brush off with a series of semi random movements, onto flat concrete areas. I used Wargamer: Regiment Brush.



Base Edges:

To make the miniatures stand out and underline them, I painted bases’ edges with Matt Black. Wargamer: Regiment Brush again.



Varnishing:

Finally I sealed the paint job with Anti Shine Matt Varnish. This protective layer will keep my Clone Troopers secure from damage, while I game them into oblivion. With this I have finished the paint job.



I hope you find this tutorial interesting. Be sure to let me know your thoughts in the comments below or via Facebook or Instagram. I would also appreciate it if you considered sharing this content with your friends, who might find it useful. Many thanks to Rebel.pl for sponsoring this content. Stay tuned for more Star Wars: Shatterpoint tutorials.

1