• contact@scarhandpainting.com

Tag Archives: Most Popular

Tutorial: Painting Marble

Welcome to Painting Marbe tutorial. Here I will take you on a Step-by-step trip through the process of painting marble the same way as seen at: Gallery: Horus Lupercal

Before we start, some notes:

  • This one requires airbrush.
  • To better demonstrate the technique used I used standard 55mm and 25mm round bases.
  • As usual, please take note that what works for me might not necessarily work for you.

Step one: Undercoat

I started with a solid layer of Vallejo German Red Brown. Any similar colour would do.

Step two: Base texture

For this step I used a life hack. I took few pieces of steel wool, taped them together and used them as a stencil. I then airbrushed pure white paint through the stencil and onto the bases.

Step three: Texture

Next I applied more layers of marble texture. This time I manually applied irregular stains of Army Painter Strong Tone Ink, waited half a minute then removed the paint with a paper towel. I then repeated the process once again applying and then removing excess Strong Tone Ink.

Step four: Sealing the colour

I then painted entire base with Army Painter Soft Tone Ink thinned with Games Workshop Lahmian Medium. I tried to keep the layer smooth and even.

Step five: Gloss

Finally I applied two layers of airbrushed Gloss Varnish. This resulted in a nice polished glossy look. Depending on the effect you aim for Gloss Varnish can be switched with either Satin ot pure Matt. 

Here’s how the finished base looks like. 

Note from the author: This tutorial is by far the most popular article on Scarhandpainting.com. It was first published in early 2016 and then refurbished exactly four years later. I hope you enjoy this new look and that the tutorial is now much easier to follow. Comments and Critique are welcome.