• contact@scarhandpainting.com

Tag Archives: Bizarre

Special Project: “Toad Fountain”

“It is a Dark Time.
The might of the Empire is dust, their crown is lost to them and their glory forgotten.
The promise of an age of peace and prosperity is drowned in blood.
This is your time. For the ruins of Mordheim hold prize beyond imagination: stones of power which can grant all your wishes.
But beware of your enemies.
Fear the Possessed, the Beasts of the Pit which roam the night.
Watch for the thieves of the Rat men, the Skaven of the Underworld.
Dread the corpses who walk like the living: the foul Vampires and their rotting minions.
This is Mordheim, the city of the Damned. This is the home of all your hopes. Be wary or it will be your grave as well.”

Mordheim rb.s.124

Following the previous Mordheim article I would like to present the “Toad Fountain” – another addition to my Mordheim scenery collection. The same night I started to work on “Dead Tree” I encountered difficulties with falling asleep. My imagination bombarded me with countless visions of cool Mordheim scenery pieces, ruined bridges, fallen temples and overturned carts. Among many otheres was a diamond in for of a big, eye catching fountain…


At first I approached this project from many different angles. Wasn’t entirely sure how to handle the main body of the fountain and even what to actually put on top of it. I only knew how I would like it to look in the end. I considered building entire fountain out of MDF pieces or even plasticard. In the end I decided to use a GW’s Tower of Sorcery bottom piece to base the construction at. With that behind me I could have predicted the size and role this scenery piece would fill in my newly developed gaming board. Be it a plaza filler or top piece of an urban hill – I was sure this one will bring a lot of dark and strange mood to my City of the Damned.


I started the project with cutting out the entire inner surface of the Tower of Sorcery’s base. I had to use a heated knife to do this, cause the plastic was really thick. Once done I cut a huge chunk of plasticard, mounted the construction on it and cut it to match the base of the fountain. I filled two canals in the base with skulls and bricks picked from scratch, then used modelling putty to fill any remaining holes. Having a firm floor in place I then used strips of plasticard to form the inner wall of the fountain. Smoothed the edges with modelling putty and mounted the inner feature, made out of GW’s scenery piece…





I then started to figure out which miniatures to put around the pool and on the main plinth. Had real problems with that, due to not enough statue looking miniatures. I had some old Sisters of Sigmar, but each one was a different piece. Any other stuff except Stormcast Ethereals was too diverse to be even considered, and the Space Marine like guys looked just ridiculous, and uber epic’ish to be mounted. Totally out of place which you can see below…


Salvation came in form of Talisman the board game, where four awesome looking frogs can be found. Frogs totally fit into Mordheim’s unhealthy, dark mood – so I decided to ultimately break down the Talisman set and use these four creatures as statues. But what to do with a center piece? I considered leaving it empty or building an altar on top of it. Nothing seemed fitting the space so in the end I decided to take a risk and try to sculpt my own Toad. To do so I picked a smooth, flat egg-like rock and used it as main body. Then I just built the texture around it, mounted it on the plinth and added arms, leggs and facial features. I used small crystal balls on the back of the main Toad so that it fit to the rest of the herd…





I was really happy with the result of my sculpting, especially while I am not at all that good of a sculptor. Usually I just use random stuff instead of making it myself. Still – this turned out pretty cool so a win for me. I even used the excess of the modelling putty to make more fish and creatures, mixed them with the ones created during the “Dead Tree” Special Project and mounted all on a piece of plasticard to be easily painted outside of the fountain. The scenery piece was ready for another step…



This one was painted side by side with the previous Special Project. I had a strong Mordheim fever back then and was so deep in trance as not to take any mid-paint pictures except for one. Real shame, but what’s done is done. What’s worth saying is that I airbrushed a lot, covering entire Fountain with Dark Sea Green from Vallejo and then moving up with Light Grey Green and other colours. Purple and brown points were added to the fray before entire fountain was drybrushed softly with Pale Wych Flesh. I then washed the interior of the pool with some of Vallejo washes and mounted all the newly painted fish on top of tiny translucent pieces of plastic cut out of a coca-cola bottle. After the paint and glue dried I just filled the basin with Crystalline 940 resin halfway up and let it rest for a day. I also cut thin lines of translucent plastic and modelled them to look like falling water using heat. Added them to the construction the next day and had to pack entire thing for transportation to a new home, along with all my stuff…

Something around two weeks later I finally got to work on the “Toad Fountain” once more. I added some streaks and soft glow to the frogs, filled the basin with resin up to the brim and added some leaves inside. I also applied leaves all around the fountain to keep it visually coherent with the rest of the terrain I’m planning to make.







You can see the finished piece below, while more pictures can be found in the “MORDHEIM TOAD FOUNTAIN” Special Project gallery…

This piece can also be found at CoolMiniOrNot, where you can vote for it.



I hope you like this piece. I have big plans for Mordheim, wish to bring even more Mordheim scenery pieces to life in the future. Right now I’m working on a complete redesign of my previous Mordheim gaming board. Have a lot of ideas, but due to lack of free time I plan to take small steps. If you want to see more of the upcomming Mordheim related articles, just stick around and they will certainly pop up from time to time.












Tutorial: Modelling Phalloso Dreadnought

Are you a true Warhammer 40k fan? Do you play Space Marines like all grown men? Do you want to dominate the Warhammer 40k tournaments? Do you intend to strike fear with your Space Marines? If the answer is yes then this tutorial is something for you!


A Dreadnought is the embodiment of Warhammer 40k, Space Marines and Fear. A mighty warrior once fighting in countless battles to finally give his life ‘for the Emperor!’ and spend eternity encased in the cold confines of a Dreadnought carapace. Even among Dreadnoughts there is none mightier and more feared than Phalloso type. Armed with two powerful Dick-shaped close combat weapons the Phalloso strikes fear in the hearts of all enemies, including Necron and Tyranids! There is a saying among the Imperials that ‘to die by the… hands of a Phalloso Dreadnought is to taste fate worse than to be consumed by the Gods of Chaos themselves’



1) Using Citadel Hobby Knife* get inside the box! There’s a Dreadnought waiting to be born!
* Remember to reattach a special protective cover when you’re done. You don’t want to harm yourself!


2) The box, assembly instruction and transfer sheets are all garbage* for ladylike kids – trash them immediately!

*”But i like the transfer sheets” WHOOOOT?! Stop this tutorial right now and do not – i repeat – DO NOT lay your womanish hands on a sacred plates of a Dreadnought! Go and collect some Eldar!


3) Using Citadel Plastic Cutters remove two Dreadnought Close Combat Weapon base parts* from the sprues. I know that for a srong man’s hands Plastic Cutters are poor and unnatural tool but one must suffer if one is to create a magnificent work!

*”What about other parts?” Don’t worry, we will get there in time. The most important thing in modelling is to plan your work accordingly!


4) We finally got there! From now on all the modelling stuff will get more manworthy! Using Citadel Hobby Vice* cut some Green Stuff into pieces!

*Some poor modellers disregard Citadel Hobby Vice as useless. If someone tells you not to buy one  then he’s modelling skills are probably far below the mediocree level.


5) Time for some sculpting. First prepare a Green Stuff ball anr roll it down with Citadel Clean-up Tool*.

*This tool is pretty useless but hey – we’ve just found a use for it!
Now sculpt the D’claws starting with the head and foreskin. The more love you’ll put to it the more fear it will strike in the future.


6) After gluing the D’claws to the Dreadnought’s forehands place them into the Vice and under a strong light source. Heat will quicken the process of hardening and you will be able to start modelling some ammo clips. Start by chopping more Green Stuff pieces with Citadel Razor Saw and create four balls from it. Polish the balls with Citadel Clean-up Brush so that they shine* nicely.

*This will bring additional terror effect as the light reflected by the balls will imitate that of Emperor’s own halo!


7) Do you feel your testosterone pumping in your vanes?! LEt it loose by reaping off all the rest of the Dreadnought’s bitz out of sprues. Use man-friendly Citadel Hobby Vice to do it and sing THIS SONG while doing so!


8) For most of us gluing small bitz together is the worst of all nightmares! It usually ends up with fingers, trousers and literally everything glued together but for the parts intended. Do not falter tho as you can deceive the system and use two* Citaled Hobby Vice to do the work.

*Double the Vice, double the fury, double the MAN POWER!
Remember to drill some with Citadel Hobby Drill. It is not necessary but it’s a lot of fun and your girlrfiend will get into good mood if she sees it.


9) You now have two mighty weapons for your Phalloso Dreadnought but he still misses one vital part – it’s soul – the Sarcophagus! Do not bother to use a regular hobby file to prepare the front part of the Sarcophagus as it will take forever to make it done. Use the all-powerful Citadel Emery Boards to flatten the surface, then put some Green Stuff on it and sculpt* a nice Cock ornament on it.

*The best tool for the job is the back of Citadel Hobby Saw!


10) Just add some final touch by futher polishing the Phalloso Dreadnought with Citadel Clean-up Brush. Remember that every minute devoted to the task will earn you advantage in future battles!


11) It’s finally done! The Phalloso Dreadnought is ready for battle and you can rest assured that it’ll scare the hell out of your opponents! You can sip some pure whiskey out of Citadel Brush Cup while admiring your work…