fbpx
  • contact@scarhandpainting.com

Tag Archives: Bases

Tutorial: Cave Bases

In this easy, step-by-step tutorial I’m going to show you how to create a Cave Base.

I USED:

  • Super Glue,
  • Basing Glue,
  • Toothpicks and nail sticks*
  • Small gravel stones**
  • Games Workshop Texture Paints,

*Ask your GF if you don’t know where to obtain the latter.

**Search in IKEA or any home/garden store. A lifetime stockpile of these is less than 5€.

 

1  I started by cutting off the tips of both toothpicks and nail sticks. These would do for fine stalagmites later on.

2  I then applied couple of drops of basing glue onto the base. Before it dried out I applied Super Glue on it and mounted stalagmites, tip upwards, on the mix.

3  Next I covered entire stalagmites with basing glue and left it to dry. The excess glue, moved by the power of gravity, was drawn downwards, where it rested around the base of the stalagmites, making them look smooth and natural.

4  Using the previous technique I applied some basing glue in few spots and then Super Glue'ed some gravel over it. You can actually glue any type of stuff with this - like skulls, some pieces of armour etc.

5  I then covered antire surface, except for any fillers, with Games Workshop's texture paints. I used a mix of Agrellan Earth and Agrellan Badland for this tutorial, but actually any of the range will do - as long as you would like to undercoat the base afterwards.

6  The final step was to undercoat dried out base with Chaos Black spray...

Now, what’s left is just to paint the bases with your preferable colour scheme. I chose to go red/copper style similar to ‘the Wave’ and watered some spots with clear resin, but the number of potential colour schemes is unlimited.

If you ever use the tutorial – be sure to let me know and send some pictures via FACEBOOK. I will be happy to see how it turned out 😉

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Scarhandpainting

Tutorial: Desert Rocky Bases

Below is a quick five-colour Step-by-step about painting rocky desert bases. I used this method to base a big army of wh40k Tau – be sure to see the end results in GALLERY: WARHAMMER 40,000 TAU lvl 3

I USED:

  • Airbrush,
  • Large flat brush,
  • Regular brush,
  • Black undercoat,
  • German Red Brown (Vallejo) Surface Primer,
  • Earth (Vallejo Game Air),
  • Light Brown (Vallejo Model Air),
  • European Dust (Vallejo Wash),
  • Flayed One Flesh (GW),

 

Desert Rock Bases 2

1  I have undercoated (Airbrush) the entire base with Black paint. To properly undercoat the jagged edges of cork I've added some water to the plack paint and then used a Large flat brush to apply the mixture over this surface.

Desert Rock Bases 3

2  I have airbsrushed German Red Brown onto the entire base. It does not had to be precise, just enought to cover the cork and some bigger flats of sand.

Desert Rock Bases 4

3  Still using airbrush I've applied Earth colour over the surface. This time I ensured that some areas of the cork will be less covered than the others. The process was almost random - just picked some spots to have more paint.

Desert Rock Bases 5

4  Light Brown followed, being airbrushed over the base. Once again I tried to cover some spots better than the others. This time tho I tried not to paint over sand too much, just some delicate puffs of paint.

Desert Rock Bases 6

5  Once the paint was utterly dry I sprayed European Dust over the entire base. The layer had to be thin, just enought to cover the base without leaving any stains.

Desert Rock Bases 7

6  Lastly I used a large flat brush to drybrushed the entire base with Flayed One Flesh. Once it was done I also edged some major edges of the cork with the same colour. Clean black rant of the base followed.

Desert Rock Bases 8

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Scarhandpainting

Tutorial: Concrete Bases

Ever wanted to make some cool looking bases for your Infinity models? Here’s a tutorial of how to do it 🙂

I USED:

*Round bases,
*Plastticard,
*Some SF bitz,
*Modelling Knife, File, Sculpting Tool and glue,

Instead of SF bitz you can use literally anything including toothpick, brass mesh, pieces of computer, irregular pieces of plastic etc.

p1

1  Attach some bitz onto the bases using Super glue. You don't have to fit these bitz ideally, just place them so that they create a nice composition with the rest of the base.

p2

2  Now glue some small pieces of plasticard around the bitz. Try not to use too much glue as it may spill onto the edge of the base. If need be you may want to prepare plastticard pieces to ideally fit around bitz you've used.

p3

3  Use sharp modelling knife to delicatelly cut off all the excessive plasticard. Use the edge of the base to guide the knife's cutting edge.

p4

4  Here's how the effect of your work should look like:

p5

5  It is a good idea to further smooth the edges using knife so they will be easier to file later on.

p6

6  Now it is time to get rid of protruding bitz. The quickest way to do it is to use plastic cutters.

p7

7  Next step is to file the edges of both plastic bitz and plasticard.

p8

8  The work is almost at an end. The bases will look much better with some facture added to them. Use a sculpting tool or other similar object to carve some futuristic straight lines and bolt holes.

p9

p10

9  You can easily add some battle damage. Just embed the modelling knife in the edge of the base and then pull it up to rend some plasticard chunks out of it.

p11

That is all – you’ve just made a SF, battle damaged base for yourself.

p12

End Result:

Nomad Moran 1

Scarhandpainting
123