- contact@scarhandpainting.com
Welcome to Kings of War Armada Water Bases tutorial. Here I will take you on a Step-by-step trip through the process of creating and painting bases as can be found in the Gallery: Armada Basileans from Mantic Games Kings of War Armada.
Before we start, some notes:
I plan to go all-in with Mantic’s KoW: Armada. This means a lot of ships from across numerous fleets. To keep my bases easy to paint and visually coherent I decided to limit myself to some water effects and simple tricks. Instead of going through a lot of effort, trying to build multiple layers of transparent water, I switched out standard MDF bases for clear acrylics.
That doesn’t mean the method wouldn’t work with MDF’s. If you’d rather stick with Mantic’s bases – undercoat them white, then paint sides with some dark blue and you’d be ready to go. That being said, this method was developed with clear acrylic bases in mind so please take that into account when trying different approaches.
Without further ado, let’s get these bases wet!
I used:
Step one:
I used a large brush to apply AK Interactive Diorama Series: Pacific Blue Water Gel onto entire surface of the base. I then stippled a bit to create an uneven surface. Lastly I used a finger to remove the excess gel from the sides of the base.
Step two:
I repeated first step two more times, leaving the paint to dry between each repeat. This darkened the base significantly and resulten in a nice solid layer with a lot more detail on top of the first one.
Step three:
Once I was done painting ships I applied AK Interactive Pacific Blue Gel at the edges of each ship’s underside. I then followed with Super Glue through the middle and glued the ship on top of a base. Excess gel was queezed out and filled any holes between the ship and the base.
Step four:
I then applied more Pacific Blue Gel around the ship. It was a bit messy so I used a clean flat brush to move any excess gel from the ship’s sides and onto the base.
Step five:
Some time later I applied AK Interactive clear Water Gel effects around the ship. I used a small brush and slowly built the mass of splashing water at the front and on the sides of the ship. This time I didn’t care about messing up the hull.
Step six:
Next I applied AK Interactive Water Foam. Using a small brush I applied small dots of the effect on top of previous layer. This one is very white so I tried to avoid applying to much. Mistakes were removed with a clean flat brush – pushed into more tight lines, where necessary.
Step seven:
Lastly I mixed white paint, water and AK Interactive clear Water Gel effect and stippled a bit behind and around the ship to create a nice effect of dissolving water foam.
Task complete! The fleet is now sailing into the unknown. I hope you like this tutorial. For more pictures of finished fleet visit Gallery: Armada Basileans
Be sure to let me know your thoughts on the method either in the comments below or at my facebook profile.
Please link this tutorial to anyone who likes to learn new hobby tricks.
Lastly I also invite you to follow me at Instagram, where I drop some nice pictures from time to time.
All speed ahead and see you in the next article!
Mantic Games – a UK based company made up of hobby enthusiasts that brought about such titles as Deadzone, Kings of War and Warpath into the tabletop wargaming world. On top of that the company released some successful board game titles including Hellboy, The Walking Dead and DreadBall just to name a few. Just recently Mantic Games released a brand new Kings of War: Armada – a game of sea battles set in the already established world of Kings of War’s Pannithor. Today I would like to take you on a short cruise through two Armada sets – an Orc Booster Fleet and a Basilean Booster Fleet – to see how the miniatures present themselves straight from the box. Grab the railing and let’s set sail into the unknown!
I would like to move away from the usual Quality, Visuals, Functionality etc. review format. This time around I will go ship-by-ship with a summary at the end. Let’s get started!
First set to go is Basileans. I love the design of Basilean ships and decided this will be my main fleet. Purchased seven sets in total so you see I’m pretty serious about this. Anyhow – the design is great and each individual ship has a lot of character. Basilean ships seem a bit high fantasy, but also look realistic enough to feel like real ships.
Basilean set is impressive but not without issues. The Gur Panther and Slopes are of a very good quality with crisp detail, just few air bubbles. Elohi in the other hand turned out to be damaged (hull part missing one lantern) and with one mast below expected quality. Anything between bent and air bubbles I have no issues with. This is to be expected with resin models and is easy to deal with. Damaged parts and miscasts are something entirely else and I will be placing a complaint about the Elohi. I can’t stop but wander if this is a rare occurrence, or is this something Quality Control accepted as a valid product.
Time for some Orcs! Amongst humans, dwarves and undead, the Orc ships stand out as ragtag, crude, scrap-built hulks. This seems classic Orcs, regardless of what game you’re coming from, and I like this about Mantic – they go “classic” a lot.
Except for one shifted casting sail and some bent masts, this set turned out to be of a very good quality. A lot of uneven detail clearly forced Mantic to divide the sculpts into more parts – some cannons and hull elements being packed on their own. Everything fits though and I can say this is the quality I would expect from such a set. No issue beyond standard miniature preparation to deal with.
Kings of War: Armada stuck me as a rather cheap to get into. With two players set priced at 90€, Booster and Starter Fleet both being 40€ and an additional large Ship being 20€ you’re looking at a pretty low entry point. You can get into the game for about 50€. Furthermore you can get to an entire fleet with backup models for about 100-150€ more. Seems very well priced for a full skirmish tabletop game experience.
Booster Fleet price of 40€ for four resin ships (six to be precise, but four playable miniatures) is a legit price, especially taking into account these are large resin miniatures.
I won’t lie – I’m totally biased towards this product. I’m hyped for the game to a point where I ordered couple sets on top of a huge pre-order, just to get them few days before the main order arrival. There are clearly some issues with particular parts which I hope will get resolved. Either way a rating is required of me thus on a scale where 10 is awesome, 8 is good, 6 is ok, 5 is mediocre, 3 is bad and I don’t want to even mention 1 – I’d say Kings of War: Armada Booster Fleet sets are a solid 8 plus. They rub on “awesome” and are of much higher quality than most resin miniatures I worked with up to now. What’s your thoughts? Is this rating fair, or do you disagree? Let me know in the comments below. Cheers!
Where to buy:
Mantic Online Store is the way to go.
Alternatively if you’re from Poland – I highly recommend any of these two stores: Vanaheim / Minibitwa