fbpx
  • contact@scarhandpainting.com

Tutorial: Cave Bases

Tutorial: Cave Bases

In this easy, step-by-step tutorial I’m going to show you how to create a Cave Base.

I USED:

  • Super Glue,
  • Basing Glue,
  • Toothpicks and nail sticks*
  • Small gravel stones**
  • Games Workshop Texture Paints,

*Ask your GF if you don’t know where to obtain the latter.

**Search in IKEA or any home/garden store. A lifetime stockpile of these is less than 5€.

1  I started by cutting off the tips of both toothpicks and nail sticks. These would do for fine stalagmites later on.

2  I then applied couple of drops of basing glue onto the base. Before it dried out I applied Super Glue on it and mounted stalagmites, tip upwards, on the mix.

3  Next I covered entire stalagmites with basing glue and left it to dry. The excess glue, moved by the power of gravity, was drawn downwards, where it rested around the base of the stalagmites, making them look smooth and natural.

4  Using the previous technique I applied some basing glue in few spots and then Super Glue'ed some gravel over it. You can actually glue any type of stuff with this - like skulls, some pieces of armour etc.

5  I then covered antire surface, except for any fillers, with Games Workshop's texture paints. I used a mix of Agrellan Earth and Agrellan Badland for this tutorial, but actually any of the range will do - as long as you would like to undercoat the base afterwards.

6  The final step was to undercoat dried out base with Chaos Black spray...

Now, what’s left is just to paint the bases with your preferable colour scheme. I chose to go red/copper style similar to ‘the Wave’ and watered some spots with clear resin, but the number of potential colour schemes is unlimited.

If you ever use the tutorial – be sure to let me know and send some pictures via FACEBOOK. I will be happy to see how it turned out 😉

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Scarhandpainting

Leave a Reply