• contact@scarhandpainting.com

Monthly Archives:September 2018

Tutorial: Painting Infinity Daofei Camo

Welcome to Painting Infinity Daofei Camo tutorial. Here I will take you on a Step-by-step trip through the process of painting Daofei Camo the same way as seen at: Gallery: Yu-Jing.

Before we start, some notes:

* This one requires no Airbrush.
* For better visibility there are two different sizes of the pattern.
* What works for me might not necessarily work for you.

I used:

  • Bastion Grey (P3),
  • Pale Wych Flesh (GW),
  • Panzer Dark Grey (Val, air),
  • Interior Green (Val, air),

Let’s begin!

*  Start by applying a smooth layer of P3 Bastion Grey.

*  Create basic pattern, applying Pale Wych Flesh spots leaving similar sized gaps inbetween .

*  Next apply Panzer Dark Grey spots between Pale Wych Flesh, so that every new spot touches at least one from the previous layer.

*  Follow up with a third layer of pattern, using Interior Green and following the same rules. Be sure to leave some spots of Bastion Grey visible.

*  Lastly add tiny spots of Panzer Dark Grey on top of Pale Wych Flesh pattern. Some might touch the edges.

That’s it, you have painted the pattern. Congrats! Be sure to visit Infinity Yu-Jing gallery for further inspiration if need be 😉


Nazroth

December 2018

December is that “special time of the year”. I spend half of the time on family business and running errands, whilst all the “hobbying” is pushed to the background. Not that cool stuff is not being borne, it’s just that I avoid most of the regular projects and focus on some real deal specials. This time three projects managed to catch my attention. Freebooter’s Fate Amazons, being a continuation of 2017’s project. The “Shimmering Cutter”, a December Special Project. The Yu-Jing collection, following last month’s “Guijia” Special Project. I had a real good time and am happy to close the year with these three.

Freebooter’s Fate AMAZONS – View gallery…

“SHIMMRING CUTTER” Special Project – View gallery…

Infinity YU-JING ‘Witness Me!’ – View gallery…

Nazroth

November 2018

November started with a boom! Another Cthulhu themed board game added to the portfolio – Shadows of Brimstone. I also got a chance to work on some Shadespire projects. Sepulchral Guard, Spiteclaw’s Swarm and Ironskull’s Boyz all got painted. I can;t wait to start painting Nighvault warbands as well. I also managed to squeeze some personal stuff inbetween regular projects, adding more Infinity Nomads to the collection and focusing on exploring new ways to paint with Special Project: “Guijia”. It was a good month 🙂

SHADOWS OF BRIMSTONE – View gallery…

Infinity NOMADS – View gallery…

“GUIJIA” Special Project – View gallery…

Shadespire IRONSKULL’S BOYZ ‘Fast & Furious’ – View gallery…

Shadespire SEPULCHRAL GUARD ‘Fast & Furious’ – View gallery…

Shadespire SPITECLAW’S SWARM ‘Fast & Furious’ – View gallery…

Nazroth

TUTORIAL: PAINTING “GUIJIA” part 3 TACTICAL ROCK

Welcome to Painting “Guijia” tutorial. Here I will take you on a Step-by-step trip through almost entire process of painting Infinity the Game “Guijia” Special Project. This is part 3 focused on Black Under Armour.

Before we start, some notes:

* Visit Tutorial: Painting “Guijia” part 2 Black Mesh to see how it got to this point.
* This one requires an Airbrush.
* Paint’s are to be properly thinned before airbrush application.
* As usual, please take note that what works for me might not necessarily work for you.

Right now you should be after  Tutorial: Painting “Guijia” part 2 Black Mesh with a miniature in this state:

*  Start by masking the Guijia's leg. I used a piece of foil and masking tape to cover areas that I didn;t wanted to get dirty. Then manually applu a layer of Val. Prussian Blue, avoiding areas of Black Mesh.

*  Next airbrush a layer of Light Sea Blue, focusing on the most exposed areas of armour.

*  Next, airbrush a mix of Val. Light Sea Blue with a bit of Val. White focusing on middle areas, creating a transition from previous layer.

*  Next highlight the edges with GW Pale Wych Flesh.

*  To seal Blue, wash it with thinned down GW Guilliman Blue Glaze. You can see that I have also painted some battle damage. I did it using Val. Cavalry Brown, underlined with Val. Off White.

I leave adding Black Under Armour and additional details to you. Now to the Sword… To be honest, because of strong light, pictures taken during this one’s painting process did not captured how the sword looked like and I really don’t like how they turned out. That being said – I will still show you the Sword and name the paints used, but instead of a Step-by-step tutorial, let’s just call it a BONUS.

BONUS:

List of paints:
Val. Warlord Purple,
Val. Off white,
GW. Pale Wych Flesh,
AP. Purple Tone Ink,

I leave the base and additional detail to you. Congratulations, you have painted a Guijia 🙂

Was this tutorial helpful? Did you enjoyed it? Leave me a comment 😉

Nazroth

TUTORIAL: PAINTING “GUIJIA” part 2 BLACK MESH

Welcome to Painting “Guijia” tutorial. Here I will take you on a Step-by-step trip through almost entire process of painting Infinity the Game “Guijia” Special Project. This is part 2 focused on Black Under Armour.

Before we start, some notes:

* Visit Painting “Guijia” tutorial part 1 to see how it got to this point.
* This isn’t a real deal ‘Non Metallic Metal’ – just a hibrid.
* As usual, please take note that what works for me might not necessarily work for you.

Assuming the Tutorial: Painting “Guijia” part 1 Orange Armour is where we left off, here’s the miniature in it’s current state:

*  This is the most difficult part of the process. Mix Val. Black (air) 1:5 with Val. Panzer Dark Grey (air) and apply it to everything, that is not external armour plates and blade. The difficult part is to not mess up all these sexy Orange-to-Yellow armour plates. If you do, you can try out Erasing Bloopers following one of my tutorials, still the airbrushed nature of the layer will make it extremely difficult.

TUTORIAL: ERASING BLOOPERS

*  Next apply a watered down GW Fenrisian Grey over black areas. It is important not to fill any recesses. You can apply more than one thin layer, overlaping each other and even leave some irregularities - this will work to the overall paint job's advantage.

*  Next, higlight edges with GW Pale Wych Flesh. This time no thinning down the paint. You can imitate some scratches, reflexions etc.

*  Now wash it all with a thinned down Army Painter Dark Tone Ink. Once again be extra carefuul not to paint over finished armour plates.

*  Now it's time to make it POP! Using GW Pale Wych Flesh and Val. Off White, highlight the edges and create some points of focus, scratches, reflections etc.

Congratulations! By following these five steps you should now have most of the work behind you. Next week: Tactical Rock and bonus Sword…

Nazroth

TUTORIAL: PAINTING “GUIJIA” part 1 ORANGE ARMOUR

Welcome to Painting “Guijia” tutorial. Here I will take you on a Step-by-step trip through almost entire process of painting Infinity the Game “Guijia” Special Project. This is part 1 focused on Orange/Yellow Armour.

Before we start, some notes:
* This one requires an Airbrush.
* Paints are to be properly thinned before airbrush application.
* As usual, please take note that what works for me might not necessarily work for you.

Allright! Undercoat the miniature with black, check your gear and let’s do this!

*  Start with a solid layer of airbrushed Val. Orange Brown. I applied mine in three delicate, overlaping layers. I went around the miniature, with top and bottom, focusing on Armour Plates areas.

*  Next, airbrush Val. Scrofulous Brown. Mostly from the top and up to 45* degree, focusing on the most exposed areas. You can start building transitions to previous layer avoiding shadowed areas. 

*  I forgot to take a picture of this layer. That's on me. Fortunatelly the result can be seen on the next picture. The layer is a mix of Val. Scrofulous Brown and Val. Off White, applied from top onto the center of all exposed areas.

*  Next, outline all the edges with Val. Ice Yellow

*  Lastly, underline armour plates with Army Painter Soft Tone Ink. I also used strongly dilluted Soft Tone to apply some more shadow in certain 'over the edge' areas.

If it all sounds easy it’s because it actually is. The real challenge comes with next step, but that’s for next week’s tutorial…

Nazroth

TUTORIAL: MODELLING TOXIC SLUDGE BASES

In this easy, step-by-step tutorial I’m going to show you how to create a Toxic Sludge Base. I designed these bases for Warhammer 40,000 Death Guuard Plague Marines.

I USED:

  • Basing Glue,
  • Shoe moist absorbers**
  • Vallejo Interior Green,
  • Vallejo Duuck Egg Green,
  • Vallejo Light Livery Green,

**Where I’m from there’s a small paper bag filled with moist absorbsion balls in every shoe box. If you can’t get that, just use some grains or make small balls out of green stuff or modeling clay.

*  I started by covering entire base with a layer of basing glue.

*  I then put couple of tiny balls onto the base, creating 'buubbles' and let it all dry.

*  Once dry, I covered are around the bubbles with another layer of basing glue.

*  I let it all dry for about an hour, then undercoated entire base black.

*  I then airbrushed a layer of Vallejo Interior Green over entire base.

*  Next I airbrushed a layer of Duck Egg Green concentrating on bubbles and surrounding areas.

*  Last thing to do was to airbrush two layers of Light Livery Green over entire bases and paint the sides black.

 

Nazroth

October 2018

Toxic stuff, Pink stuff, Camo stuff, random stuff! October was definitely crazy! (in a positive way off course). Project of the month goes to Infinity the Game Shasvastii, which infiltrated my workbench for almost three weeks. Two smaller projects followed, being respectively: Warhammer 40,000 Death Guard and a collection of fantasy miniatures. There was even a little Infinity the Game Acontencimento side-project. A lot going on. With big things comming next month I think it’s time to slow down a bit… for a time…

Infinity SHASVASTII ‘Witness Me!’ – View gallery…

Warhammer 40,000 DEATH GUARD ‘Fast & Furious’ – View gallery…

FANTASY MINIATURES ‘Fast & Furious’ – View gallery…

Infinity MISCAELLOUS ‘Chrome & Shiny’ – View gallery…

Nazroth

TUTORIAL: MODELLING SEED-EMBRYO

In this easy, step-by-step tutorial I’m going to show you how to create a Seed-Embryo marker, same as from Infinity SHASVASTII lvl 5 ‘Witness Me!’ gallery.

I USED:

  • Super Glue,
  • Basing Glue,
  • Office Clips,
  • Toothpicks,
  • Small balls (airsoft gun ammo)
  • Hobby Cutters & Hobby Tweezers,

*  I started by straightening two office clips, leaving both ends curved.

*  I then wraped them around one another and once done, cut a piece with hobby cutters.

*  Next I applied a drop of basing glue, followed by a drop of super glue onto a base.

*  Then I glued wraped up office clip piece on top of the super glue spot.

*  Airsoft gun ammo ball followed, on top of the office clip piece. First a drop of super glue, then basing glue, then I slightly dipped the ball in super glue and glued it on.

*  Lastly I modelled three growth pieces on top of the ball, applying a small dose of basing glue with a tootpick, then covering it with super glue.

And that’s it! The Seed-Embryo markers ready in few minutes. Just make sure you let them dry before painting – I recommend about 4 hours for super glue – basing glue mix to fully dry out and produce awesome texture.


Do you like this tutorial? Have you made your own Seed-Embryo markers? Be sure to let me know in the commets below!

Nazroth

September 2018

September was quite a journey. From Warhammer 40k Tau Empire, through Malifaux Master of Puppets spiced with Warzone Resurrection Valpurgius and a bunch of Infinity the Game scenery pieces. Have I mentioned a grand new Special Project of “Inquisitor’s Beast”? And the Toys… there were also the Toys XD XD

Warhammer 40,000 TAU EMPIRE ‘Fast & Furious’– View gallery…

Crates and Containers – View gallery…

“INQUISITOR’S BEAST” Special Project ‘Heroes Never Die!’ – View gallery…

Warzone VALPURGIUS ‘Chrome & Shiny’ – View gallery…

Malifaux MASTER OF PUPPETS – View gallery…

Nazroth